MBU4199 – Micro ATX Motherboard
- Intel 10th Gen Core™ with Intel® Q470E
- 4 DDR4 DIMM up to 128GB
- Multiple expansion: 1 PCIe x16, 1 PCIe x4, 2 PCI, M.2 M & E key
- 3 independent displays: VGA, DP++, HDMI
- Rich I/O: 2 GbE, 6 COM, 2 USB 3.2, 2 USB 3.2 Gen1, 2 USB 2.0
- 15-Year CPU Life Cycle Support until Q2 ‘34 (Based on Intel IOTG Roadmap)
Specifications
| SYSTEM | PROCESSOR | 10th Generation Intel® LGA 1200 Socket Processors, TDP support up to 125W
Intel® Core™ i9-10900E (10 Cores, 20M Cache, up to 4.7 GHz); 65W Intel® Core™ i9-10900TE (10 Cores, 20M Cache, up to 4.5 GHz); 35W Intel® Core™ i7-10700E (8 Cores, 16M Cache, up to 4.5 GHz); 65W Intel® Core™ i7-10700TE (8 Cores, 16M Cache, up to 4.4 GHz); 35W Intel® Core™ i5-10500E (6 Cores, 12M Cache, up to 4.2 GHz); 65W Intel® Core™ i5-10500TE (6 Cores, 12M Cache, up to 3.7 GHz); 35W Intel® Core™ i3-10100E (4 Cores, 6M Cache, 3.8 GHz); 65W Intel® Core™ i3-10100TE (4 Cores, 6M Cache, to 3.6 GHz); 35W Intel® Pentium® G6400E (2 Cores, 4M Cache, 3.8 GHz); 58W Intel® Pentium® G6400TE (2 Cores, 4M Cache, 3.2 GHz); 35W Intel® Celeron® G5900E (2 Cores, 2M Cache, 3.2 GHz); 58W Intel® Celeron® G5900TE (2 Cores, 2M Cache, 3.0 GHz); 35W |
| CHIPSET | Intel® Q470E Chipset | |
| MEMORY | Four 288-pin Non-ECC UDIMM up to 128GB
Dual Channel DDR4 2400/2666/2933MHz |
|
| BIOS | AMI SPI 256Mbit | |
| GRAPHICS | CONTROLLER | Intel® HD Gen 9 Graphics |
| FEATURE | OpenGL 4.5, DirectX 12, OpenCL 2.1
HW Decode: AVC/H.264, MPEG2, VC1/WMV9, JPEG/MJPEG, HEVC/H265, VP8, VP9 HW Encode: MPEG2, AVC/H264, JPEG, HEVC/H265, VP8, VP9 |
|
| DISPLAY | 1 x VGA
1 x DP++ 1 x HDMI 1.4b VGA: resolution up to 1920×1200 @ 60Hz DP++: resolution up to 4096×2160 @ 60Hz HDMI: resolution up to 4096×2160 @ 24Hz |
|
| TRIPLE DISPLAYS | VGA + DP++ + HDMI | |
| EXPANSION | INTERFACE | 1 x PCIe x16 (Gen 3)
1 x PCIe x4 (Gen 3) 2 x PCI 1 x M.2 2242/2260/2280 M key (PCIe Gen3 x4 NVMe/SATA/Intel® Optane Memory and intel RST support) 1 x M.2 2230 E key (USB 2.0/PCIe) |
| AUDIO | AUDIO CODEC | Realtek ALC888 |
| ETHERNET | CONTROLLER | 1 x Intel® I211AT PCIe (10/100/1000Mbps)
1 x Intel® I219LM PHY with iAMT12.0 (10/100/1000Mbps) (Core i9/i7/i5 supports iAMT) |
| REAR I/O | ETHERNET | 2 x GbE (RJ-45) |
| SERIAL | 1 x RS-232/422/485 (RS-232 w/ power) (DB-9) | |
| USB | 2 x USB 3.2 Gen2
2 x USB 3.2 Gen1 (Up to 6 x USB 3.2 Gen1, MOQ required) 2 x USB 2.0 |
|
| PS/2 | 1 x PS/2 (mini-DIN-6) | |
| DISPLAY | 1 x VGA
1 x DP++ 1 x HDMI |
|
| AUDIO | 1 x Line-out
1 x Mic-in 1 x Line-in (opt., MOQ required) |
|
| INTERNAL I/O | SERIAL | 5 x RS-232 (2.54mm pitch) (Up to 9 x RS-232, MOQ required) |
| USB | 2 x USB 3.2 Gen 1
4 x USB 2.0 (2.54mm pitch, Colay vertical Type A, opt.: MOQ required) |
|
| AUDIO | 1 x Front Audio Header
1 x S/PDIF |
|
| SATA | 4 x SATA 3.0 (up to 6Gb/s, SATA 3)
RAID 0/1/5/10 |
|
| DIO | 1 x 16-bit DIO | |
| LPC | 1 x LPC (supports LPC EXT-RS232/RS485 module) | |
| SMBUS | 1 x SMBus | |
| OUTPUT & INTERVAL | System Reset, Programmable via Software from 1 to 255 Seconds | |
| SECURITY TPM | Infineon TPM2.0 (opt., MOQ required) | |
| TYPE | ATX | |
| CONNECTOR | 8-pin ATX 12V power; 24-pin ATX power | |
| CONSUMPTION | Typical: i9-10900K: 3.3V @ 0.36A (1.19W); 5V @ 1.02A (5.1W); 12V @ 3.8A (45.6W)
Max.: i9-10900K:3.3V @ 0.38A (1.25W); 5V @ 1.82A (9.1W); 12V @ 15.64A (187.68W) |
|
| RTC BATTERY | CR2032 Coin Cell | |
| OS SUPPORT | Windows 10 Pro 64-bit
Windows 10 IoT Enterprise 64-bit Linux |
|
| ENVIRONMENT | TEMPERATURE | Operating: -5 to 65°C Storage: -30 to 60°C with RTC Battery; -40 to 85°C without RTC Battery |
| HUMIDITY | Operating: 5 to 90% RH
Storage: 5 to 90% RH |
|
| MTBF | 504,615 hrs @ 25°C; 283,232 hrs @ 45°C ; 176,865 hrs @ 60°C ; 128,658 hrs @ 70°C
Calculation Model: Telcordia Issue 4 Environment: GB, GC – Ground Benign, Controlled |
|
| MECHANICAL | DIMENSIONS | microATX Form Factor 244mm (9.6″) x 244mm (9.6″) |
| HEIGHT | PCB: 1.6mm; Top Side: 33mm; Bottom Side: 3mm | |
| CERTIFICATIONS | CE, FCC Class B, UKCA |
Downloads
Enquire Today
Fill in your details below and tell us about your system enquiry and we’ll get back to you.
Applications for every market
With a pan-European presence and offices in the UK and France, Industrial Computers specialises in the design and manufacture of Mission Critical Applied Computing Platforms. Serving markets including telecommunications, broadcast, military, industrial and medical, we work closely with our customers to conceive and manufacture the system their market and application requires.
Building from our experience in manufacturing highly reliable computer systems for different industries, our product offering includes a large range of standardised and customised products.







